AI Air Induction Flat Spray Tip Nozzle Only, Polymer, 110°, .05 Orifice, Brown, Stainless Insert, Dicamba Approved

50 Mesh Screen Recommended but not Included

This aspirating nozzle will do an excellent job of reducing drift on broadcast applications. Fluid flow pulls air into the nozzle through the air induction ports where it mixes with the spray fluid in a mixing chamber. The result is air filled droplets that are larger than normal, which are less subject to drift. As these drops burst on the target they explode on impact into many small droplets providing good coverage and penetration. Pressure Range is 30 - 115 PSI.

For pre emerge herbicides minimum pressure is 40 psi, for posting chemicals use 80 psi or higher.

VS Models feature a color coded polymer body with Stainless tip Insert and have a tapered edge flat spray pattern. Has EPDM gasket.

Use with CP25597 quickjet caps. (See related items.)

MAKE SURE YOU CHECK YOUR PRODUCT LABEL TO MAKE SURE YOU ARE SPRAYING ON LABEL

SSAI11003VS is a Dicamba Approved Nozzle for Enlist One Max 80 PSI (Pressure at Tip).