Combo-Jet® Spray Nozzle, DR110-015, Dark Green, 110° Degree, .015 Orifice, Drift Control

Wilger's DR Series third-stage drift reduction series provides good coverage and exceptional drift reduction. DR series tip-caps reduce about 90% of driftable fines, compared to the Wilger ER series. Ideal for applications which value drift reduction over spray coverage. Coverage can be maintained by using higher application volumes.

Features:

• Pre-orifice Drift Reduction
• Very large droplet size (529µ VMD, based on 110°, .06 Orifice at 40 PSI)
• Least likely to drift compared to other Wilger nozzles.
• Good coverage, less than other Wilger nozzles.

The Combo-Jet® Tip-Cap with Its Snap-In Strainer is Easier to Clean and Stays Clean Longer!

• Stainless steel tip is a permanent part of the cap.
• Snap-in strainer is longer with 40% more area to reduce tip plugging. It can be cleaned without removing from the Tip-Cap, which reduces the potential for debris dislodged during cleaning to plug the tip.
• The Tip-Cap, strainer and seal stay assembled when you change nozzles, which makes them easier to handle and store.
• Radialock cap design secures cap in place, so it is less likely to get knocked off and it doesn't over-compress the seal.
• 110° Degree Flat Fan Pattern
• Available in 80° fans also