Combo-Jet® Spray Nozzle, MR110-08, White, 110°, .08 Orifice, Mid Range, Dicamba Approved

Wilger's MR Series second stage drift reduction series produces great coverage with very significant drift reduction. MR tip-caps reduce about 75% of driftable fines, compared to the ER series. Ideal for applications which require good coverage, but also need high levels of drift reduction, such as systemic herbicides.

Features:

• Pre-orifice drift reduction
• Large droplet size (474µ VMD, based on 110°, .06 Orifice at 40 PSI)
• Major reduction in spray drift compared to other Wilger nozzles.
• Very good coverage compared to other Wilger nozzles.

The Combo-Jet® Tip-Cap with Its Snap-In Strainer is Easier to Clean and Stays Clean Longer!

• Stainless steel tip is a permanent part of the cap.
• Snap-in strainer is longer with 40% more area to reduce tip plugging. It can be cleaned without removing from the Tip-Cap, which reduces the potential for debris dislodged during cleaning to plug the tip.
• The Tip-Cap, strainer and seal stay assembled when you change nozzles, which makes them easier to handle and store.
• Radialock cap design secures cap in place, so it is less likely to get knocked off and it doesn't over-compress the seal.
• 110° Degree Flat Fan Pattern
• Available in 80° fans also

MAKE SURE TO CHECK YOUR PRODUCT LABEL TO MAKE SURE YOU ARE SPRAYING ON LABEL

WLMR110-08 is approved for Enlist Duo 25-60 Max PSI (Pressure at Tip), Enlist One Max 70 PSI (Pressure at Tip).