Ace FMC-HYD-204 Hydraulic Sprayer Pump - Cast Iron Centrifugal with 1-1/4" x 1" FPT Ports

FMC-HYD-204: For Pressure Compensating Closed Center (John Deere), or Open Centered Systems rated at 4-13 GPM.

These cast iron straight centrifugal frame-mounted pumps are driven by a close-coupled hydraulic motor. The hydraulic motors have built-in reverse check valves to prevent seal damage due to impeller coasting and reverse rotation. Each motor also has an integral needle valve to bypass excess hydraulic fluid on open-center systems. Valox Impeller; Cast Iron optional. Stainless shafts and wear rings. Standard Viton® mechanical seals.

60 GPM MAX, 100 PSI @ 4600 RPM MAX 

Available E-Coated with silicon carbide seal for salt brine.
Viton® is a registered trademark of DuPont Performance Elastomers.