Straight Centrifugal Pump, Cast Iron, 220 FP Flange x 1-1/2" FPT Inlet, 200 SP Flange x 1-1/4" FPT Outlet with #206, 7 GPM Hydraulic Motor, 120 GPM MAX, 120 PSI @ 5100 RPM MAX

FMC150FHYD206: For Pressure Compensating Closed Center Systems (John Deer type), Load Sensing Closed Center Systems (Case-IH type), and Open Center systems rated 7-16 GPM Equipped with restrictor orifice.

These cast iron straight centrifugal frame mounted pumps are driven by a close coupled hydraulic motor. The hydraulic motors have built in reverse check valves to prevent seal damage due to impeller coasting and reverse rotation. Each motor also has an integral needle valve to by-pass excess hydraulic fluid on open center systems. Valox Impeller; Cast Iron optional. Stainless shafts and wear rings. Standard Viton® mechanical seals.
Viton® is a registered trademark of DuPont Performance Elastomers.